SAFETY PRECAUTIONS
FOR INSTALLATION / WARNING
∙ Plug the power cord into a wall socket
with the power specifications of the
product or higher and use the socket
for this appliance only. In addition, do
not use an extension cord.
Sharing a wall socket with other appli-
➔
➔
ances using a multi outlet power strip
or extending the power cord may re-
sult in electric shock or fire.
Do not use an electric transformer. It
➔
➔
may result in electric shock or fire.
If the voltage/frequency/rated current
➔
➔
condition is different, it may cause
electric shock or fire.
FOR INSTALLATION / WARNING
∙ Do not install this appliance near a
heater, inflammable material. Do not
install this appliance in a humid, oily or
dusty location, in a location exposed
to direct sunlight and water (rain
drops). Do not install this appliance in
a location where gas may leak.
Failure to do so may result in electric
➔
➔
shock or fire.
FOR INSTALLATION / CAUTION
∙ The appliance should be installed in
a place where the power cord of the
product can be easily pulled out.
Failure to do so may result in electric
➔
➔
shock or fire due to electric leakage.
∙ Install your appliance on a level and
hard floor that can support its weight.
Failure to do so may result in abnor-
➔
➔
mal vibrations, noise, or problems
with the product.
∙ There should be over 6 in. space
around the appliance.
3
US
If space for air intake is not enough,
➔
➔
humidification capacity may decrease.
If the appliance is too near wall side,
➔
➔
the wall paper may get damaged.
∙ When installing the product, make
sure that no heavy objects are on the
power cord.
Failure to do so may result in electric
➔
➔
shock or fire.
FOR POWER CORD / WARNING
∙ Unplug the product, and then remove
foreign substances (dust, moisture,
etc.) of the power plug terminal or
power plug connection part with a
dry cloth on a regular basis.
Otherwise, electric shock or fire may
➔
➔
occur.
∙ When the product, power plug or
power cord is damaged, contact your
nearest service center.
∙ Plug the power plug into the wall
socket firmly. Do not use a damaged
power plug, damaged power cord or
loose wall socket.
Failure to do so may result in electric
➔
➔
shock or fire.
∙ When unplugging the product, do not
pull the power cord. Grip the power
plug, and then pull the power plug.
Otherwise, electric shock or fire may
➔
➔
occur.
∙ Do not pull or excessively bend the
power cord. Do not twist or tie the
power cord.
∙ Do not hook the power line over a met-
al object, place a heavy object on the
power cord, insert the power line be-
tween objects, or push the power cord
into the space behind the appliance.
This may result in electric shock or fire.
➔
➔