Cembre B-TC4500 Notice D'utilisation Et Entretien page 5

1. GENERAL CHARACTERISTICS
Application range
Max. cutting diameter
Operating pressure
Dimensions
Weight with battery
Motor
Operating temperature
Recommended oil
Operating speed
Safety
Rechargeable battery
Type
Weight
Battery charger
ASC30-36
Input
Acoustic noise
(1)
L
pA
L
pCPeak
L
WA
Vibration
(2)
Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u
(1)
L = weighted continuous acoustic pressure level equivalent.
pA
L = maximum value of the weighted acoustic displacement pressure at the work place.
pCPeak
L = acoustic power level emitted by the machine.
WA
Directive 2006/42/EC, annexe 1, point 2.2.1.1
(2)
Weighted root mean square in frequency of the acceleration the upper limbs are exposed to for each biodynamic
reference axis. Tests carried out in compliance with the indications contained in EN ISO 25349-1/2 and UNI EN 28662-1
Standards, and under operating conditions much more severe than those normally found.
5
B-TC4500 B-TC4500E
suitable for cutting Copper, Aluminium, ACSR and Steel
conductors, ropes and rods (Ref. to pag. 30)
mm (inches)
bar (psi)
mm (inches)
kg (lbs)
V DC
°C (°F)
twin speed operation and automatic switching from a rapid
advancing speed of the ram to a slower, more powerful speed
V / Ah / Wh
kg (lbs)
type ASC55-
EU
V /
Hz
W
dB (A)
dB (C)
dB (A)
m/s
2
B-TC4500T B-TC4500A
45 (1-25/32")
700 (10,000)
486 x 239 x 102,5 (19.1 x 9.4 x 4)
6,4 (14.1)
18
-15 to +50 (+5 to +122)
AGIP ARNICA 32 or equivalents
maximum pressure valve
18 / 5.2 / 93.6
CB1852L (Li-Ion)
0,66 (1.45)
ASC30-36- ASC30-36-
UK AUS/NZ
220 - 240 / 50 - 60
85
66,9
86,9
74,9
0,398
ASC30-36-
USA/CAN
115 / 60