AEG FSE63307P Notice D'utilisation page 19

How to start the Machine Care
programme
Before starting the Machine
Care programme, clean the
filters and spray arms.
1. Use a descaler or a cleaning product
designed specifically for dishwashers.
Follow the instructions on the
packaging. Do not put dishes in the
baskets.
2. Press and hold simultaneously
and for about 3 seconds.
The indicators and
display shows the programme duration.
3. Close the appliance door to start the
programme.
When the programme is complete, the
indicator is off.
10.2 Internal cleaning
• Carefully clean the appliance,
including the rubber gasket of the
door, with a soft damp cloth.
• Do not use abrasive products,
abrasive cleaning pads, sharp tools,
strong chemicals, scourer or solvents.
• To maintain the performance of your
appliance, use a cleaning product
designed specifically for dishwashers
at least once every two months.
Carefully follow the instructions on the
packaging of the product.
• For optimal cleaning results, start the
Machine Care programme.
10.3 Removal of foreign
objects
Check the filters and the sump after each
use of the dishwasher. Foreign objects
(e.g. pieces of glass, plastic, bones or
toothpicks, etc) decrease the cleaning
performance and can cause damage to
the drain pump.
1. Disassemble the filters system as
instructed in this chapter.
2. Remove any foreign objects by hand.
3. Reassemble the filters as instructed
10.4 External cleaning
• Clean the appliance with a moist soft
• Only use neutral detergents.
• Do not use abrasive products,
flash. The
10.5 Cleaning the filters
The filter system is made of 3 parts.
1. Turn the filter (B) counterclockwise
2. Remove the filter (C) out of filter (B).
CAUTION!
If unable to remove the
objects, contact an
Authorised Service
Centre.
in this chapter.
cloth.
abrasive cleaning pads or solvents.
C
B
A
and remove it.
ENGLISH 19