Basic Settings - AEG FSE63307P Notice D'utilisation

10 www.aeg.com
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email to:
info.test@dishwasher-production.com
In your request please include the
product number code (PNC) found on
the rating plate.

6. BASIC SETTINGS

You can configure the appliance by
changing basic settings according to
your needs.
Number Setting
1
2
3
4
5
6
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in
setting mode.
When the appliance is in setting mode,
the bars of the ECOMETER represent
available settings. For each setting, a
dedicated bar of the ECOMETER flashes.
The order of the basic settings presented
in the table is also the order of the
settings on the ECOMETER:
Values
Water hardness From level 1L to
level 10L (de-
fault: 5L)
Rinse aid level From level 0A
to level 6A (de-
fault: 4A)
End sound On
Off (default)
Auto door open On (default)
Off
Key tones On (default)
Off
Latest pro- On
gramme selec- Off (default)
tion
For any other questions regarding your
dishwasher please refer to the service
book provided with your appliance.
1)
Description
Adjust the level of the water softener ac-
cording to the water hardness in your area.
Adjust the level of the rinse aid according
to the necessary dosage.
Activate or deactivate the acoustic signal
for the end of a programme.
Activate or deactivate the AirDry.
Activate or deactivate the sound of the
buttons when pressed.
Enable or disable the automatic selection
of the most recently used programme and
options.
1 2 3 4 5 6
6.1 The water softener
The water softener removes minerals
from the water supply, which would have