Preparation Using Ground Coffee; Dispensing Hot Water; Adjusting The Grind Setting - Siemens TE6 Série Mode D'emploi

en Preparing drinks
Milk froth or warm milk
● Touch the appropriate symbol to select
Milk froth or Warm milk.
● Touch C to begin dispensing the
beverage.
Milk froth or warm milk is dispensed from
the beverage outlet.

Preparation using ground coffee

This fully automatic coffee machine can
also be operated using ground coffee
(but not instant coffee).
F
When using ground coffee, the
setting for the strength of the coffee,
dispensing two cups at once and
aromaDouble Shot is not available.
The appliance must be ready for use.
● Place a prewarmed cup underneath the
beverage outlet 4.
● Touch the appropriate symbol to select a
black or milky coffee drink.
● Touch H repeatedly until the display
shows Ground coffee.
● Open the ground coffee drawer 12.
● Place no more than two level measuring
spoons of ground coffee in the drawer.
F
Caution!
Do not place coffee beans or instant
coffee in this drawer.
● Close the ground coffee drawer 12.
● Touch C to begin dispensing the
beverage.
The coffee is brewed and then dispensed
into the cup.
F
Touch C again to
p rematurely halt dispensing.
12

Dispensing hot water

Before hot water is dispensed the milk
system should be cleaned and the milk
tube removed (see the section "Cleaning
the milk system"). If the milk system is not
cleaned small amounts of milk may be
dispensed together with the hot water.
B
Risk of burns!
The milk system 4b becomes
extremely hot. After use, always let
them cool down before you touch
them.
The appliance must be ready for use.
● Place a prewarmed cup underneath the
beverage outlet 4.
● Touch the symbol for Hot water.
● Touch C to begin dispensing the
beverage.
F
If you see the message Please
remove suction hose, proceed as
follows:
● Take off the milk tube 4c and then touch
C again.
Hot water will flow out of the outlet 4.
F
Touch C again to
p rematurely halt dispensing.

Adjusting the grind setting

You can use the rotary selector 11 to adjust
the grind setting from coarse to fine.
F
Caution!
Adjust the grind setting only while the
grinding unit is running, otherwise
you may damage the appliance.
A
Risk of injury!
Do not reach into the grinding unit.