Nextbook NXW8QC132 Mode D'emploi page 7

Masquer les pouces Voir aussi pour NXW8QC132:
Table des Matières

Publicité

2. Use only the supplied power adapter to charge your tablet. Using unauthorized
power adapters or Micro-USB cables may severely damage your tablet.
Note:
1. The battery is not fully charged when you unpack your tablet.
2.
A fully discharged battery takes
3. When the battery is being charged, the LED indicator lights red, and when the
battery has been fully charged, the LED indicator lights orange.
4. The LED indicator will light 4-5 seconds later after the adapter has been
connected to the tablet and the wall outlet.
Turning On the Tablet
Note: This Nextbook device has been equipped with Windows 8.1 system at the
factory, so user need not perform Windows setup again before using for the first time.
1. Press and hold the Power button for 2 seconds to turn on your tablet. The lock
screen appears.
2.
Swipe-up your finger from the bottom of the display to switch to the login screen,
and then enter password to log in to Windows.
Now the tablet is ready for use when the Windows Start screen is displayed.
Note: If the login screen is not enabled in Windows 8.1, you will be taken directly from
the lock screen to the Start screen.
Turning Off the Tablet
You can turn off the tablet in two ways:
Using the Power button:
1.
Press and hold the Power button for at least 4 seconds.
2.
Swipe-down the shutdown confirmation screen to the bottom edge of the display
to turn off the tablet.
Using Charms:
1.
Swipe-in from the right edge of the display to access Charms.
2.
Touch Settings
about 4
→ Power
→ Shut down to turn off the tablet.
hours to fully charge.
7

Publicité

Chapitres

Table des Matières
loading

Table des Matières