Lumilight Led - Zephyr Verona ZVO-E30BG Guide D'utilisation, D'entretien Et D'installation

Maintenance
ZEPHYRONLINE.COM

LumiLight LED

In the unlikely event that your LumiLight LED fails, please contact Zephyr to order replacement parts.
See the list of parts and accessories page for part numbers and contact information.
LED Removal (FIG. E):
1. Remove both aluminum mesh filters.
2. Remove light panel by two screws.
3. Disconnect LED light quick connector.
4. Push in the two side clips on the ends of the LED light.
5. Push LED light through the light panel opening.
Push the clip
FIG. E
25
Verona Use, Care, and Installation Guide