Franke FME 407 XS Mode D'emploi page 10

FIXING THE PLATE
• Lift up the Fixing plate and fit the slots onto the two
screws previously inserted in the ceiling, and turn un-
til they are at the centre of the adjustment slot.
Warning: The plate must be facing in the direction
shown in the figure
• Tighten the two screws completely and screw in the
other two provided; before locking the screws
completely it is possible to make adjustments by
turning the piece, making sure that the screws do not
come out of the adjustment slot.
• The unit must be securely fastened both due to the
weight of the Hood and the stress caused by
occasional sideways pressure on the Appliance when
in position. Once the unit has been fixed, make sure
that the plate is stable.
• In all cases where the Ceiling is not sufficiently
strong at the point of suspension, the Installation
technician must strengthen it with suitable plates and
counterplates, anchored
elements.
• Check that the plate is level on the ceiling.
EN
to structurally sound
1
10