TDK-Lambda KPSB6 Série Mode D'emploi page 13

Product HANDBOOK KPSB6 Series
Standard Specific Safety Instructions:
Whilst all individual outputs are classed as SELV outputs in accordance with the standard
IEC/EN/UL/CSA62368-1 (<60Vdc or 42.4V peak), when connected in series, combinations of these outputs
may exceed these values and become hazardous output voltages. See output parameter section.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
Environmental Specifications:
Description Operation Storage
KPSB6
Use Indoor -
Temperature -40°C to +80°C -40°C to +85°C
(derating see note 1.)
Humidity 10 - 93% RH, non-condensing 10 - 93% RH, non-condensing
Altitude 5000m 5000m
Orientation See Figure 1
Material Group IIIb
Pollution Degree 2
Note 1. For KPSB6 derate linearly from 60°C to 80°C.
Level of Insulation:
Dielectric Strength testing is carried out as follows:
Primary mains circuits to secondary: 3kVAC, 4142VDC 1 minute,
Safety Certifications:
nd
UL / cUL 62368-1 (2 Edition)
nd
IEC / EN 62368-1(2 Edition)
CE marking when applied to any KPSB6-yy product indicates compliance with the Low Voltage Directive in
that it complies with EN62368-1 and the RoHS Directive.
Fusing: Internal fuses (F1): Single fuse in the L line, T1A, 250V,
Input Connection:
ACN – Neutral ACL – Live
Pinned version
KPSB6 –xx
Encapsulated version
KPSB6 – E
Page 13 of 15 KPS6 Series, 260674 issue 2, Oct 2020