Teka HL-870 Guide Rapide D'utilisation page 41

Pre-heating is not needed for the other reci-
pes.
Follow these instructions when cooking with
these recipes:
• First select the recipe, and the oven will
begin pre-heating.
• IMPORTANT: Do not put the food into the
oven until the signal is given.
Child Safety Function
This function, which can be selected at any
time, stops small children operating the oven.
To activate this function, touch both the + and
– sensors at the same time until you hear a
beep. You will see the symbol
the temperature display. The oven is locked.
To de-activate this function, touch both the +
and – sensors at the same time until you hear
a beep, with the symbol
With this function, any grease or dirt that is
stuck to the walls of the oven can easily be
removed through the combined action of
steam and the excellent properties of the new
Teka Hydroclean ® enamel.
Other oven settings
light up on
going out.
®
Teka Hydroclean
• When the temperature set for the recipe is
reached, the oven will emit a signal.
• You can now put the food into the oven.
• The signal will continue to sound until you
put the food in.
• Finally, it will cook the food automatically
according to the recipe chosen.
Oven Light
The inside light will go on:
• When the oven door is open. If the door is not
closed after a certain amount of time, the
light will turn off to reduce power consump-
tion.
• When any cooking function is set or recipe
selected. The light will turn off after a cer-
tain time.
If you want to turn the light on during cooking,
just touch the + sensor. Touching it for a cer-
tain length of time will cause it to beep and
the light will stay on all the time it is cooking.
To turn the light off, just touch the + symbol
again.
Cleaning Function:
Thanks to the new TEKA Hydroclean
logy, the oven does not need to be cleaned
with a grease removal product. When the
water and dirt are removed, the walls of the
oven are clean and grease-free.
® techno-
41