Getting Started; Operating Instruction; Card And Usb; Picture Mode - Braun DigiFrame 709 Mode D'emploi

2. Getting Started

2.1 Plug one end of the included AC adapter into a
standard 110-240V AC electrical outlet and the
other end into the right side the frame.
2.2. Remove the protective film covering the LCD.
2.3. Power on the unit by pressing the Power but-
ton at the backside of the unit (Press ON/OFF but-
ton for a longer period).

3. Operating Instruction

After turning on the unit, it will show the startup
picture, press MENU to get to the card select inter-
face.
E N G L I S H

3.1 Card and USB

It supports SD/SDHC/MMC and USB 2.0. After ins-
erting a card or USB device, slideshow will play
automatically, then press MENU twice to access to
photo, file, calendar and setup. Press
firm.
Note:
Make sure there are supported picture files in the
Card or USB device.

3.2 Picture Mode

Press MENU to choose "MEMORY CARD" in the main
menu. Highlight Photo, press
six-picture mode, use
re, press II to play the picture in single window.
Press II to start slideshow pictures in the selec-
ted slide mode.
9
II to con-
II to access to the
to choose the pictu-