Panasonic ES8096 Manuel D'utilisation page 5

Before use
This Wet/Dry shaver can be used for
wet shaving with shaving lather or for
dry shaving. You can use this water-
tight shaver in the shower and clean
it in water. Treat yourself to wet lather
shaves for at least three weeks and
notice the difference. Your Panasonic
Wet/Dry shaver requires a little time
to get used to because your skin and
beard need about a month to adjust
to any new shaving method.
Charge the shaver for at least 8 hours
before using it for the first time or
when it has not been in use for more
than 6 months.
Parts identification
(see fig. 1)
A Protective cap
B System outer foil
C Inner blades
D System outer foil release but-
tons
E Pivot action selector
F LCD display
G On/Off switch
H Trimmer
I Trimmer handle
J Charging adaptor holder
K Charging adaptor with auto-
matic voltage adjustment
L Rotatable stand
Charging adaptor
(see fig. 1)
Lift up the charging adaptor holder
when charging the shaver. (See fig.
1(A))
(Restore the charging adaptor holder
when carrying the unit.) (See fig.
1(B))
When using the charging adaptor,
rotate the stand at the base of the
charging adaptor to ensure that it is
stable. (See fig. 1(C))
Charging
(see fig. 2)
Place the charging adaptor upright
on a flat surface. Plug the adaptor
into an AC outlet.
It will adjust automatically to voltages
between 100-240V AC.
In some areas, a special plug adap-
tor may be required.
Switch the shaver off and place it up-
right into the charging adaptor with
the switch facing toward the front.
When the shaver is placed in the
correct position, the light in the LCD
display turns on, and the plug sym-
bol appears (see fig. 2(a)).
It shows the remaining battery ca-
pacity from 0% to 100%, in 10% in-
crements.
When the charging is completed, it
will indicate "100%" and the light in
the LCD display will flash (see fig.
2(b)).
You can fully charge the shaver in 1
hour if the LCD display shows 20%
and lower.
The plug symbol appears in the LCD
display when the remaining battery
7
7