ALPATEC AC 9E Mode D'emploi page 17

DRAINING OPERATION.
Your product is with shower technology, which means that most of the moistures will be drained through
the exhaust pipe.
This is automatic.
Sometimes there are too many moistures and some parts go in an inner water tank.
When the water tank is full, E2 error appears on LED screen, unit "bip" several times and stops working.
Turn off the unit, put the movable water tank (14) under the drainage knob (9) and unscrew the knob and
rubber plug to let water flow out.
When water tank is empty, replace knob and rubber plug and restart the unit.
CLEANING
Before any cleaning operation, stop and unplug the unit.
Do not use chemical solvent.
Use a dry and wet cloth to clean the outside of the unit.
ANTI DUST AIR FILTER:
If the anti dust air filter is dirty, the air conditioner will be less performing.
Clean the filter at least every two months.
Take the filter upward.
Wash with warm water and neutral cleanser, dry and put back.
17