Publicité
Les langues disponibles
Les langues disponibles
Connecting the Units
7 When not connecting a rear speaker lead to a Subwoofer
Multi-CD player
(sold separately)
This Product
Subwoofer output
Fuse
or Non-fading output
IP-BUS cable
Blue/white
Antenna jack
To system control terminal of the power amp or
Auto-antenna relay control terminal (max. 300mA
12 V DC).
IP-BUS input (Blue)
Yellow
To terminal always supplied
with power regardless of
ignition switch position.
Red
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Orange/white
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Perform these connections when using a
different amp (sold separately).
Connecting cords with RCA pin plugs
(sold separately)
System remote control
White
Gray
Front speaker
Front speaker
White/black
Gray/black
Left
Right
Violet
Green
Rear Speaker
Rear Speaker
Green/black
Violet/black
Subwoofer
Subwoofer
7 When using a Subwoofer without using a different amp (sold separately)
Multi-CD player
(sold separately)
Power amp
(sold separately)
Subwoofer output
IP-BUS cable
Yellow
To terminal always supplied
with power regardless of
ignition switch position.
Red
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Orange/white
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
Fig. 2
This Product
Fuse
Blue/white
Antenna jack
To system control terminal of the power amp or
Auto-antenna relay control terminal (max. 300mA
12 V DC).
IP-BUS input (Blue)
Left
Front speaker
White/black
Subwoofer
Green/black
<ENGLISH>
Right
White
Gray
Front speaker
Gray/black
Green
Violet
Subwoofer
Violet/black
Note:
Change the Initial Setting of this product. (Refer to the
Operation Manual.) The subwoofer output of this unit
is monaural.
Fig. 3
Publicité
