Mitsubishi Electric Mr.SLIM PLA-RP BA Série Manuel D'utilisation page 11

6. Timer
<To Turn On the Weekly Timer>
Press the Timer On/Off button 9 so that the "Timer Off" indication (at
goes dark.
TIME SUN
C
10
6.1.2. Simple Timer
■
You can set the simple timer in any of 3 ways.
• Start time only:
The air conditioner starts when the set time has elapsed.
• Stop time only:
The air conditioner stops when the set time has elapsed.
• Start & stop times:
The air conditioner starts and stops at the respective elapsed times.
■
The simple timer (start and stop) can be set only once within a 7-hour
period.
The time setting is made in hour increments.
Note:
*1. Weekly Timer/Simple Timer/Auto Off Timer cannot be used at the same
time.
*2. The simple timer will not operate when any of the following conditions
is in effect.
The timer is off; the system is in malfunction state; a test run is in prog-
ress; the remote controller is undergoing self-check or remote control-
ler check; the user is in the process of selecting a function; the user is
in the process of setting the timer; the system is under central control.
(Under these conditions, On/Off operation is prohibited.)
TEMP.
MENU ON/OFF
BACK MONITOR/SET DAY
CLOCK
PAR-21MAA
1 9
2
<How to Set the Simple Timer>
Timer Setting
2 4
Hr ON
AFTER
1. Be sure that you are at a standard control screen, and that the simple
timer indicator is visible in the display (at 1).
When something other than the Simple Timer is displayed, set it to
SIMPLE TIMER using the function selection of remote controller (see
8.[3] (3)) timer function setting.
. Press the Timer Menu button 2, so that the "Set Up" appears on the
screen (at 2). (Note that each press of the button toggles the display
between "Set Up" and "Monitor".)
3. Press the ON/OFF button 1 to display the current ON or OFF simple
timer setting. Press the button once to display the time remaining to
ON, and then again to display the time remaining to OFF. (The ON/
OFF indication appears at 3).
• "ON" timer:
The air conditioner will start operation when the specified number of
hours has elapsed.
• "OFF" timer:
The air conditioner will stop operation when the specified number of
hours has elapsed.
C
WEEKLY
Hr ON
AFTER
SIMPLE
1
ON/OFF
2
FILTER
4
CHECK TEST
0
OPERATION
CLEAR
Action (On or Off)
3
* "— —" is displayed if there is no
setting.
1
SIMPLE
4. With "ON" or "OFF" showing at 3: Press the appropriate Set Time but-
) ton as necessary to set the hours to ON (if "ON" is displayed) or the
10
hours to OFF (if "OFF" is displayed) at 4.
• Available Range: 1 to 7 hours
5. To set both the ON and OFF times, repeat Steps 3 and 4.
* Note that ON and OFF times cannot be set to the same value.
6. To clear the current ON or OFF setting: Display the ON or OFF
setting(see step 3) and then press the Check (Clear) button 0 so that
the time setting clears to "—" at 4. (If you want to use only an ON set-
ting or only an OFF setting, be sure that the setting you do not wish to
use is shown as "—".)
7. After completing steps 3 to 6 above, press the Filter
in the value.
Note:
Your new settings will be cancelled if you press the Mode (Return) button
before pressing the Filter
8. Press the Mode (Return) button 2 to return to the standard control
screen.
9. Press the Timer On/Off button 9 to start the timer countdown. When
the timer is running, the timer value is visible on the display. Be sure
that the timer value is visible and appropriate.
<Viewing the Current Simple Timer Settings>
5
TIMER
1. Be sure that the simple timer indicator is visible on the screen (at 1).
. Press the Timer Menu button 2, so that the "Monitor" appears on the
screen (at 5).
• If the ON or OFF simple timer is running, the current timer value will
appear at 6.
• If ON and OFF values have both been set, the two values appear
alternately.
3. Press the Mode (Return) button 2 to close the monitor display and
return to the standard control screen.
<To Turn Off the Simple Timer...>
Press the Timer On/Off button 9 so that the timer setting no longer ap-
pears on the screen (at 7).
˚C
<To Turn On the Simple Timer...>
Press the Timer On/Off button 9 so that the timer setting becomes
visible at 7.
˚C
button 4 to lock
button .
4
Timer Setting
6
Hr ON
AFTER OFF
1
SIMPLE
7
˚C
SIMPLE
7
Hr ON
AFTER
˚C
SIMPLE
2
11