Care And Cleaning - Mitsubishi Electric CITY MULTI PLFY-WP-VBM-E Série Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

5. Care and Cleaning

Fri
Room
Cool
Set temp.
Auto
Mode
Temp.
Fan
Main
Main menu
Restriction
Energy saving
Night setback
Filter information
Error information
Main display:
Cursor
Page
F1
F2
F3
F4
Filter information
Please clean the filter.
Press Reset button after
filter cleaning.
Main menu:
Reset
F1
F2
F3
F4
Filter information
Reset filter sign?
Cancel
OK
F1
F2
F3
F4
Filter information
Filter sign reset
Main menu:
Navigating through the screens
To go back to the Main menu ................ [MENU] button
To return to the previous screen ........... [RETURN] button
Fri
Room
Cool
Set temp.
Auto
Mode
Temp.
Fan
will appear on the Main display
in the Full mode when it is time to
when this sign appears.
Refer to the indoor unit Instruc-
tions Manual for details.
Select "Filter information" from the
Main menu (refer to page 6), and
press the [SELECT] button.
sign.
Refer to the indoor unit Instructions
Select "OK" with the [F4] button.
When the
is displayed on the
Main display in the Full mode, the
system is centrally controlled and
If two or more indoor units are connected, filter cleaning timing for
each unit may be different, depending on the filter type.
The icon
will appear when the filter on the main unit is due for
cleaning.
When the filter sign is reset, the cumulative operation time of all units
will be reset.
The icon
is scheduled to appear after a certain duration of
operation, based on the premise that the indoor units are installed in a
The cumulative time at which filter needs cleaning depends on the
model.
This indication is not available for wireless remote controller.
Caution:
Cleaning the filters
cleaner, tap the filters against a solid object to knock off dirt and dust.
care to rinse off any detergent thoroughly and allow the filters to dry
completely before putting them back into the unit.
Caution:
such as an electric heater: this may warp them.
warp them.
unit without air filters can cause malfunction.
Caution:
supply.
in air. Clean the filters using the methods shown in the following
sketches.
Caution:
eyes from dust. Also, if you have to climb up on a stool to do the
job, be careful not to fall.
the indoor unit, otherwise injury may result.
. VBM-E Series
1 Pull the knob on the intake grille in the direction indicated by the
arrow and it should open.
2 Open the intake grille.
3 Release the knob on the center edge of the intake grille and pull the
filter forward to remove the filter.
A Knob B Grille C Intake Grille D Filter
9

Publicité

Chapitres

Table des Matières
loading

Table des Matières