Perel E305W2 Mode D'emploi page 3

Note
In clock mode, the timer will function according to preset program when the power output displays AUTO ON or
AUTO OFF, if the power output displays ON or OFF, the preset program will not function.
3.3 Clearing the programs
When in program mode, you can clear all the program presets as follows
1. To enter PROGRAM mode, press MENU. Press RCL to clear the programs presets.
3.4 Countdown timer
1. To enter Countdown mode, press MENU twice in clock mode. The hour digit flashes.
2. Press +1 or –1 to set the hour and press OK to confirm. To change the digit more quickly, press and hold
+1 or -1. The minutes digit flashes.
3. Press +1 or –1 to set the minutes and press OK to confirm. The seconds digit flashes.
4. Press +1 or –1 to set the seconds and press OK to confirm.
The countdown starts.
When the countdown stops, the countdown timer returns to 0:00:00. You can set another countdown. To
exit Countdown mode, press MENU.
Cancelling the countdown timer
To enter Countdown mode, press MENU twice in clock mode. The hour digit flashes.
Press RCL to cancel the Countdown mode.
Countdown to turn power off
When the timer is in ON or AUTO ON status, by entering countdown mode, it changes to ON automatically. At
the end of the countdown period, power is turned off.
Countdown to turn power on
When the timer is in OFF or AUTO OFF status, by entering countdown mode, it changes to OFF automatically. At
the end of the preset countdown period, power is turned on.
3.5 Random function
The random function turns appliances on and off at irregular intervals.
•
With the timer in Clock mode, press -1 to start random function.
RND is displayed on the LCD indicating timer is in random mode.
•
The preset on/off time will be randomly delayed from 4 to 32 minutes.
•
To exit the random function, press -1 again. RND disappears from the display.
3.6 Daylight savings time function
•
In Clock mode, press RCL to start the daylight savings time function. Press RCL again to stop it.
In this mode, the preset program will be delayed one hour.
•
In summer time mode, +1 hour is shown on the display and the time display automatically adds one hour.
3.7 Override function
You can override the program presets in the timer.
Press +1 or -1 to change the timer status. The options are:
•
ON: always on
•
AUTO ON: timer works according to program presets
•
OFF: always off
•
AUTO OFF: timer works according to program presets
3.8 Resetting the timer
•
To reset the timer, press the RST button with a needle or point. This will reset the time and clear all timer
program settings.
3.9 Connecting an appliance to the timer
When the programs are set:
1. Switch off your electrical appliance.
2. Plug your appliance into the timer socket.
V. 01 – 14/07/2015
E305W2 - E305W2-G
3 ©Velleman nv