TDK-Lambda DT100-C Mode D'emploi page 13

DT 100 -C Product HANDBOOK
Special Instructions
WARNING: No modification of this product is allowed.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
Environmental Specifications:
Description
Use
Temperature
Humidity
Material Group
Pollution Degree
Overvoltage Category
Safety Class
Level of Insulation:
DT100PWxxx-C
Primary mains circuit to earth
Primary mains circuits to secondary circuits
WEEE
Reference should be made to local regulations concerning the disposal of these products at the end of their
useful life.
TDK Lambda UK Ltd is a member of the B2B Compliance scheme; the scheme is operated by GAMBICA
B2B Compliance Ltd
For further information relating to the obligations of TDK-Lambda under the WEEE Directive please contact
B2B Compliance on +44 (0)1691 676124, you can also contact them via e-mail at
WWW.b2bcompliance.org.uk
Input Parameters:
Description
Nominal input voltage
Input voltage range
Nominal Input frequency
Maximum input current
Operation
Indoor
0°C - +40°C
0 - 90% RH, non-condensing
Isolation voltage
Operation
100-240VAC
90-264VAC
47-63Hz
2.5@115VAC
Page 13 of 16
0 - 90% RH, non-condensing
IIIb
2
II
I
1.5kVac
3kVac
Storage
-
-10°C - +85°C
v1, August 2019