Solo 137SB Instructions D'emploi page 22

- ENGLISH -
Instruction manual
Translation of the original instructions
Caution! Prior to operating the unit, please
read the owner's manual carefully, and most
importantly, observe all safety rules.
Observe the maintenance guidelines closely to
ensure the long service life of your equipment.
Your dealer will be glad to assist you with any
questions.
EC declaration of conformity  The EC
declaration of conformity on a separate piece of
paper forms part of these operating instructions.
Packaging and disposal
Please keep the original packaging in order to
protect the equipment against transport damage in
case you ever need to ship it or transport it. If the
packaging materials are no longer required then they
must be disposed of properly in accordance with
applicable local regulations. Cardboard packaging
materials are raw materials which can be recycled or
reused.
At the end of the equipment's service life, please
make sure that you dispose of it properly, in
accordance with the official directives and
regulations that apply in your area
This machine produces an electromagnetic
field during operation. This field may under some
circumstances interfere with active or passive
medical implants. Persons with medical implants
have to consult their physician and the medical
implant manufacturer before operating this
machine.
In the best interest of continued technological
progress we reserve the right to change the design
and configuration of any product without prior notice.
For that reason, no claims can be accepted with
reference to text and illustrations in this manual
ENGLISH 2
Brushcutter
The following symbols are used in this manual and
on the product:
Thoroughly read these operating
instructions before undertaking any
maintenance, installation and cleaning
steps
Wear ear defenders and a face shield
before starting the engine
Wear protective gloves when handling
and working with the equipment
Wear solid shoes, preferably safety shoes
with a good tread
Always handle this power tool with
particular care
Please note: objects may be thrown out
and high
Please note: power tool may kick back on
contact with a solid object
Never smoke near the power tool or
where the equipment is refuelled!
Keep open flames away from the power
tool and the fuel can
- This equipment produces exhaust fumes
and
- fuel vapours are poisonous;
never start or refuel in enclosed spaces
Type plate:
a: Type designation
b: Serial number
c: Build year (10  2010)
137SB / 142SB / 154SB
Symbols/ type plate
Maintain a minimum distance of 15
metres bystanders
Never exceed the specified
maximum speed