Maintenance And Cleaning; Avoiding Bad Odors; Protecting The Plastic Surfaces; Door Glasses - Blomberg BRFB1312SS Manuel D'utilisation

6

Maintenance and cleaning

Service life of the product is increase if it
is regularly cleaned
B
WARNING:
product before cleaning your
refrigerator.
• Never use any sharp and abrasive tools, soap,
household cleaners, detergent and wax polish
for cleaning.
• Dissolve one teaspoon of carbonate in half liter
of water. Soak a cloth with the solution and
wrung it thoroughly. Wipe the interior of the
appliance with this cloth and the dry thoroughly.
• Make sure that no water enters the lamp
housing and other electrical items.
• Clean the door with a damp cloth. To remove
door and body shelves, remove all of its
contents. Remove door shelves by moving them
upwards. After cleaning, slide them from top to
bottom to install.
• Never use cleaning agents or water that
contain chlorine to clean the outer surfaces and
chromium coated parts of the product. Chlorine
causes corrosion on such metal surfaces.
• Do not use sharp, abrasive tools, soap,
household cleaning agents, detergents,
kerosene, fuel oil, varnish etc. to prevent
removal and deformation of the prints on the
plastic part. Use lukewarm water and a soft
cloth for cleaning and then wipe it dry.
First unplug the
20 /24 EN

6.1. Avoiding bad odors

Materials that may cause odor are not
used in the production of our appliances.
However, due to inappropriate food
preserving conditions and not cleaning
the inner surface of the appliance as
required can bring forth the problem of
odor.
Therefore, clean the refrigerator with
carbonate dissolved in water every 15
days.
• Keep the food in closed containers.
Microorganisms spreading out from uncovered
containers can cause unpleasant odours.
• Never keep the food that have expired best
before dates and spoiled in the refrigerator.

6.2. Protecting the plastic surfaces

Clean with arm water immediately as
the oil may cause damage on the surface
when it is poured on plastic surfaces.

6.3. Door Glasses

Remove the protective foil on the
glasses.
There is a coating on the surface of the
glasses.This coating minimizes the stain
build-up and helps to remove the possible
stains and dirt easily.Glasses that are
not protected with such a coating may
be subject to persistent binding of air or
water based organic or inorganic dirt such
as limescale, mineral salts, unburned
hydrocarbons, metal oxides and silicones
that can easily and quickly cause stains
or material damage. Keeping the glass
clean becomes too difficult despite the
regular cleaning.
appearance and the transparency of the
glass deteriorates. Harsh and corrosive
cleaning methods and compounds will
intensify these defects and speed up the
deterioration process.
Refrigerator / User Guide
Consequently, the