Maintenance And Cleaning; Protection Of Plastic Surfaces; Door Glasses - Blomberg MDND 1880 Manuel D'instruction

5

Maintenance and cleaning

A Never use gasoline, benzene or
similar substances for cleaning
purposes.
B We recommend that you unplug the
appliance before cleaning.
C Never use any sharp abrasive
instrument, soap, household
cleaner, detergent and wax polish for
cleaning.
C Use lukewarm water to clean the
cabinet of your refrigerator and wipe
it dry.
C Use a damp cloth wrung out in
a solution of one teaspoon of
bicarbonate of soda to one pint of
water to clean the interior and wipe it
dry.
B Make sure that no water enters the
lamp housing and other electrical
items.
B If your refrigerator is not going to be
used for a long period of time, unplug
the power cable, remove all food,
clean it and leave the door ajar.
C Check door seals regularly to ensure
they are clean and free from food
particles.
C To remove door racks, remove all the
contents and then simply push the
door rack upwards from the base.
Protection of plastic
surfaces
C Do not put the liquid oils or oil-
cooked meals in your refrigerator
in unsealed containers as they
damage the plastic surfaces of your
refrigerator. In case of spilling or
smearing oil on the plastic surfaces,
clean and rinse the relevant part of
the surface at once with warm water.

Door Glasses

C Remove the protective foil on the glasses.
C There is a coating on the surface of the
glasses. This coating minimizes the stain
build-up and helps to remove the possible
stains and dirt easily. Glasses that are
not protected with such a coating may
be subject to persistent binding of air
or water based organic or inorganic dirt
such as limescale, mineral salts, unburned
hydrocarbons, metal oxides and sliciones
that can easily and quickly cause stains
or material damage. Keeping the glass
clean becomes too difficult despite the
regular cleaning. Consequently, the
appearance and the transparency of the
glass deteriorates. Harsh and corrosive
cleaning methods and compounds will
intensify these defects and speed up the
deterioration process.
C Water-based cleaning products that are
not alkaline and corrosive must be used
for regular cleaning purposes.
C Non-alkaline and non-corrosive materials
must be used for cleaning so that the
service life of this coating lasts for a long
time.
C These glasses are tempered to increase
their durability against impacts and
breaking.
C A safety film is also applied to their rear
surfaces as an extra safety measure
in order to prevent them from causing
damage to their surrounding in case of a
breakage.
*Alkali is a base that forms hydroxide ions
(OH¯) when it is dissolved in water.
Li (Lithium), Na (Sodium), K (Potassium) Rb
(Rubidium), Cs (Cesium) and artificial and
radioactive Fr (Fan-sium) metals are called
ALKALI METALS.
15
EN