Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
13
ARF VERSION ONLY:
Install the elevator (as described above) and
route the linkage throught the Fiberglass rud-
derhorn. Adjust the servo in the fuselage that
elevator controll surface and rudderhorn are
both in neutral position.
Fix the servo with a wedge and let the glue
dry.
14
15
22
Fix the servocover with Tesa tape.
Due to the small diameter we recommend to
solder the ESC and motor cables as shown on
the picture.
Publicité
Table des Matières
