01
02
03
04
THE FUSELAGE
ARF VERSION ONLY:
Install temporary the elevator. Use the longer
M3 screw for the hole in the front.
ARF VERSION ONLY:
Mark the center of the fuselage with a felt tip-
ped pen on the elevator.
ARF VERSION ONLY:
Cut a slot for the fiberglass rudderhorn on the
marking of the previvous step.
ARF VERSION ONLY:
Sand the rudderhorn slightly on both sides.
Tape the area around the slot with tesa tape
and glue the rudderhorn with 5 min Epoxy.
Remove the Tesa tape.
EN
19