Getting Started - Lumie Bodyclock ACTIVE 250 Guide D'utilisation

 English

Getting started

Here's how to set up your Bodyclock Active for the first time.
The bulb is supplied packed in a separate box and needs to be fitted into the
Bodyclock Active before use.
The lamp cover may be supplied already separated from the base, in which
case skip the next step.
to remove the lamp cover
The lamp cover is attached to the base of the Bodyclock Active by two internal
clips, one at either end of the cover:
Clip
•
Support the base of the Bodyclock Active with one hand.
•
Push firmly at one end of the lamp cover to release the clip.
•
Remove the lamp cover.
to fit the bulb
•
Screw the bulb into the holder.
•
Replace the lamp cover by pressing it down until the clips at each end pop
into place.
to position Bodyclock active
•
Decide where to put your Bodyclock Active.
The ideal place is on a bedside table near the head of your bed, near a power
socket.
Getting started
Clip
Push here