Télécharger Imprimer la page

Storage - Dirt Devil Infinity VS8 Turbo Mode D'emploi

Masquer les pouces Voir aussi pour Infinity VS8 Turbo:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21
M5036_M5037.book Seite 17 Montag, 26. August 2013 5:22 17
4.1 Coiling the suction hose
4

Storage

1. Release and remove the suction hose as
shown (Fig. 10/A).
2. Disconnect the telescopic tube from the
suction hose (Fig. 10/B).
A
10
Four clips are attached to the suction hose
(Fig. 11) – two of which engage the other two.
3. Hold the suction hose as shown by clips 1
and 3.
11
NOTE:
Clips 1 & 3 and 2 & 4 connect to become two
pairs.
4. Bring the pairs together in position
(Fig. 12).
12
5. The hose must be coiled twice at this stage
(Fig. 13). Now first join the pair of clips you
are still holding.
B
13
6. Then join the other pair of clips (Fig. 14).
14
7. Finally, stick the end of the handle into the
opening of the suction hose latch (Fig. 15).
15
4 Storage
8. Lay the coiled suction hose on top of the
dust container.
NOTE:
If you don't succeed in coiling the suction
hose free-handedly, lay it on a table and
perform steps 2 to 8. Then, you will surely
succeed.
4.2 Storing the appliance for a
longer period
For long-time storage empty the dust
container chapter 5.1, „Emptying the dust
container" and dispose ot its contents properly.
Always store the appliance in a cool, dry
place and keep it out of reach of children.
17

Publicité

loading

Ce manuel est également adapté pour:

M5036M5037