Publicité
Les langues disponibles
Les langues disponibles
Cleaning metal grease filters
The filters must be cleaned every 2 months of operation,
or more frequently for particularly heavy usage, and can
be washed in a dishwasher.
• Remove the Filters one at a time, pushing them
towards the back of the unit and at the same time
pulling downward.
• Wash the Filters without bending them, and leave them
to dry completely before replacing. (If the surface of
the filter changes colour as time goes by, this will have
absolutely no effect on the efficiency of the filter itself.)
• Replace, taking care to ensure that the handle faces
forwards.
• No water can be present in filters before installing
back in hood.
Replacing Activated Charcoal Filter
The filter is not washable and cannot be regenerated, and must
be replaced approximately every 4 months of operation, or more
frequently for particularly heavy usage.
• Remove the Filters one at a time, pushing them towards
the back of the unit and at the same time pulling downward.
• Remove the saturated charcoal filter by releasing the fixing
hooks.
• Fit the new filter and fasten it in its correct position.
• Replace, taking care to ensure that the handle faces forwards.
CAUTION: When used in recirculation mode, to Reduce
the Risk of Fire and Shock use only conversion kit Model
FILTER 1 or FILTER1LL.
LED LIGHTING UNIT
• LED lights must be replaced by Faber factory authorized
service.
10
12a
15
1
2.1
2
2.2
10
1
1
2
11
7.3
12c
12a 11
12e
7.1
7.2.1
12d
12c
12c
12c
12a 11
7.1
12d
13
Publicité
