Télécharger Imprimer la page

Craftsman CMEW231 Guide D'utilisation page 7

Ponceuse orbitale spéciale 127 mm (5 po)

Publicité

Les langues disponibles

Les langues disponibles

1. To attach the sanding disc
sanding pad
 6 
ensuring the holes in the disc align with
the holes in the pad and press the disc firmly in place.
2. The hook and loop fastening system sanding disc can
be easily removed by simply pulling it off. It can be
reused as desired.
nOTE: These sanders are not to be used in drywall
applications. Using a sanding screen (e.g., screen used for
sanding drywall) directly on the hook and loop pad will not
hold and will damage the hooks on the pad. The hooks on
the pad will wear very rapidly if left in contact with the work
surface while the tool is operating.
Fig. B
6
Dust Collection (Fig. C, D)

WARNING: Collected sanding dust from sanding
surface coatings (polyurethane, linseed oil, etc.)
can selfignite in sander dust bag or elsewhere
and cause fire. To reduce risk, empty bag frequently
and strictly follow sander manual and coating
manufacturer's instructions.

CAUTION:
Never operate these tools unless the dust
collector is in place. Sanding dust exhaust may create
a breathing hazard.
The dust bag
 3 
should be emptied after every
10 minutes of sanding.
To attach the dust bag to the sander, line up the
grooves
on the dust port
 8 
 10 
on the side dust bag collar
Slide the dust bag
 3 
onto the dust port and turn the
dust bag clockwise to lock it in place.
To remove, turn the dust bag
slide off the dust bag.
To empty the dust bag, remove it from the dust port
and dump the sanding debris into an appropriate
trash receptacle.
 5 
, carefully center it over the
5
, with the dust bag locks
 2 
9
.
 3 
counterclockwise and
Fig.C
8
2
Fig. D
OPERATION

WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start-up can cause injury cause injury.
Proper Hand Position (Fig. E, F)

WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position as shown.

WARNING: To reduce the risk of serious personal
injury, ALWAYS hold securely in anticipation of a
sudden reaction.
Proper hand position requires one hand on the main
handle 
.
7
English
10
9
3
5

Publicité

loading