RCF L-PAD 6X Manuel Utilisateur page 5

FUNCTIONS
STEREO LINE INPUT (Ch. 3/4 -
Ch. 5/6) Plug in your keyboard,
line level or stereo devices into
these balanced TRS jacks (Tip
= Hot, Ring = Cold, Sleeve =
Earth).
EQ: A three‑band EQ is available for mono channels:
HI = ±15 dB@12 kHz
MID = ±15 dB@2.5 kHz
LOW = ±15 dB@80 Hz
Dual‑band EQ for stereo channels:
HI = ±15 dB@12 kHz
LOW = ±15 dB@80 Hz
FX POST: send the signal to the INTERNAL FX, level ‑∞ to +10 dB. The signal is routed
to the FX SEND output jack. The signal is extracted in post‑fader position.
MICROPHONE INPUT (Ch. 1 - Ch. 2) Connect your microphones to these balanced XLR connector:
pin1=Earth, pin2=Hot, pin3=Cold. These inputs are provided with +48 V phantom power for condenser or
electret microphones. Gain scale 0 dB/‑50 dB.
LINE INPUT (Ch. 1 - Ch. 2) Connect your line level devices to these TRS jack connector: tip=Hot, ring=Cold,
sleeve=Earth.
GAIN (Ch. 1 - Ch. 2) This controls the level gain (0 dB/‑50 dB for microphone input and +15 dB/‑35 dB for
line input when in use).
STEREO RETURN Connect
signals from external devices,
such as FX modules, to these
unbalanced jacks.
2TK IN – 2TK OUT These
unbalanced RCA connectors are
suitable for connecting audio
player and recorder devices.
5