Spray Arms; Control Panel And Appliance - Pkm DW12-6FI Mode D'emploi

1. Turn the micro filter anticlockwise and remove it.
2. Take out the flat filter.
3. To install the filters proceed in reverse order.
 We recommend to clean the entire filter system once a week.
 Remove bigger remnants after each programme.
 Clean the coarse and micro filter with a washing-up brush.
 Do not knock against the filters as you will damage them. Your appliance will
not work properly if the filters are damaged.
 Always install the filters properly.
 Improperly installed filters may damage the appliance and dishes.

7.2 Spray arms

7.3 Control panel and appliance

 Clean the control panel with a soft damp cloth and dry it carefully.
 Clean the exterior of the appliance with a suitable polish.
 Clean the spray arms regularly as
chemicals and minerals may clog the
nozzles and bearings.
 To remove the spray arm screw off the
nut (anticlockwise). Take off the washer
at the top of the spray arm. Now remove
the spray arm.
 Clean the spray arm with warm soapy
water and the nozzles with a soft brush.
 Rinse the spray arm with flowing water
and reinstall it.
68