Mitsubishi Electric CITY MULTI PVFY-P12 NAMU-E Manuel D'utilisation page 4

• Display
CENTRAL icon *1
CHECK icon *2
Indoor temperature
Operation modes
*1 icon
CENTRAL
Appears when one of the following local operations is prohibited: ON/OFF; operation mode; preset temperature;
fan speed; vane.
*2 icon
When an error occurs, power indicator will blink, and unit address (three digits) and error code (four digits) will
blink.
Check the error status, stop the operation, and consult your dealer.
Room
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
When only error code blinks, air conditioning units stay in operation, but an error may have occurred.
Check the error code, and consult your dealer.
Room
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
*3 Preset temperature
* Centigrade or Fahrenheit is selectable. Refer to the Installation Manual for details.
In COOL, HEAT, or
AUTO (single set point) modes
Room
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
4
Preset temperature *3
Fan speed icon
Vane icon
Set to
Error code
blinks.
Set to
Error code
blinks.
Set to
Preset
temperature
* All icons are displayed for explanation.
icon appears while the unit is operated in the
energy-save mode
icon appears when Operation lock setting is
effective.
icon appears when indoor unit functions are set up.
(Refer to the Installation Manual.)
icon appears when the power is on.
In AUTO (dual set point) or
SETBACK modes
Set to
Room
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
Cooling preset
temperature
Heating preset
temperature