Sp - Speakers Sel; Dl - Display Adj - BIRDSTOP BS-20L Mode D'emploi

- Speakers Sel
SP
While playing songs, use this menu to select and enable speakers. The
three options are: only the internal speaker, only an external speaker or
both speakers at the same time.
1. With the display on, press the SEL+SET keys simultaneously for at
least 2 seconds, to enter the SETUP MENU. If the device is in power
saving mode, press any key to turn on the display.
2. Press the SEL button repeatedly until the
display.
3. Press the SET button. Input the value
only. Input the value
value to enable both speakers. Press the "-/+" buttons to set the
EI
desired value.
Value
Value
Value
4. Press the SET button to confirm.
5. To exit the menu, press the SEL button repeatedly until the
symbol appears on the display. Press the SET button to confirm or
wait until the repeller returns automatically to the track that was
playing after 10 seconds.
- Display ADJ
DL
Use this setting to change the display light brightness from a minimum
level of 1 to a maximum level of 9.
1. With the display on, press the SEL+SET keys simultaneously for at
least 2 seconds, to enter the SETUP MENU. If the device is in power
saving mode, press any key to turn on the display.
44
to enable the external speaker only. Input the
E
enables only the internal speaker
I
enables only the external speaker.
E
enables both speakers.
EI
symbol appears on the
SP
to enable the internal speaker
I
(exit)
EH