Rd - Random - BIRDSTOP BS-20L Mode D'emploi

2. Press the SEL button repeatedly until the
display.
3. Press the SET button to set the PAUSE TIME. Press the "+" button to
increase the pause time or the "–" button to decrease the pause time.
The factory-set pause time is 1 minute. (
the time expressed in tens of seconds) - Es.
( - - - ... indicate the time expressed in minutes). The pause time
1 2 3 4
can be varied as needed from CONTINUOUS to a maximum of 30 mi-
nutes
4. To set the CONTINUOUS function, press the
symbol appears on the display.
5. Press the SET button to confirm.
6. To exit the menu, press the SEL button repeatedly until the
symbol appears on the display. Press the SET button to confirm or
wait until the repeller returns automatically to the track that was
playing after 10 seconds.
- Random
rd
The random function, when activated, is used to randomly vary the
operating and pause time set for the call selected by the user. Individual
values for
tF
value is set to 30 seconds, the time of the call cannot be less than
tF
15 seconds, the 50% variation, but it could be for a period of 20 or 25
40
and vary by a maximum of 50%. For example, if the
tP
symbol appears on the
tP
- - -
01 02 03 04
indicate 40 sec.
04
button until the
- indicate
05
Co
(exit)
EH