BIRDSTOP BS-20L Mode D'emploi page 42

Maximum value 10. Maximum light sensitivity.
"Day" mode: It anticipates the start-up in the morning and de-
lays the shut-down during night.
"Night" mode: It delays the evening start-up and anticipates
the shut-down in the morning.
Value 5. Average light sensitivity.
Factory setting, which is suited for most light conditions.
Minimum value 1. Minimum light sensitivity.
"Day" mode: It delays the start-up in the morning and antici-
pates the shut-down during night.
"Night" mode: It anticipates the evening start-up and delays
the shut-down in the morning.
1. With the display on, press the SEL+SET keys simultaneously for at
least 2 seconds, to enter the SETUP MENU. If the device is in power
saving mode, press any key to turn on the display.
2. Press the SEL button repeatedly until the
display.
3. Press the SET button. Press the "-/+" buttons to set the value from
to .
10
4. Press the SET button to confirm.
5. To exit the menu, press the SEL button repeatedly until the
symbol appears on the display. Press the SET button to confirm or
wait until the repeller returns automatically to the track that was
playing after 10 seconds.
42
symbol appears on the
LS
0
(exit)
EH