Ls - Light Sense Adj - BIRDSTOP BS-20L Mode D'emploi

seconds. In this way, by altering both operation time and pause time,
you achieve combinations that do not allow the pest to get used to the
alarms.
1. With the display on, press the SEL+SET keys simultaneously for at
least 2 seconds, to enter the SETUP MENU. If the device is in power
saving mode, press any key to turn on the display.
2. Press the SEL button repeatedly until the
display.
3. Press the SET button. Press the "+" button to set the value of "1" to
enable the random function. Press the "-" button to set the value of
"0" to disable the random function.
4. Press the SET button to confirm.
5. To exit the menu, press the SEL button repeatedly until the
symbol appears on the display. Press the SET button to confirm or
wait until the repeller returns automatically to the track that was
playing after 10 seconds.
- Light Sense ADJ
LS
The light sensor has been factory set to a default of
most light conditions. Light sensitivity can be increased or decreased
from a minimum of
or off earlier or later at dawn and at dusk.
The configuration of the sensitivity of the sensor changes depending
on the use of the "day" or "night" mode. The following table shows the
behaviour of the device according to the settable functions.
to a maximum of
01
symbol appears on the
rd
05
in order to turn the device on
10
(exit)
EH
for best use in
41