Leveling The Range - Frigidaire Gallery FGEF4085TS Notice D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

40" ELECTRIC RANGE INSTALLATION INSTRUCTIONS
4.

Leveling the Range

Level the range and set cooktop height before
installation in the cut-out opening (if applicable).
1. Install an oven rack in the center of the oven.
2. Place a level on the rack (Figure 6). Take 2 readings
with the level placed diagonally in one direction and
then the other.
Figure 6: Leveling the range
3. Level the range, if necessary, by adjusting the 4 leg
levelers with a wrench (Figure 7).
Leg
Leveler
Raise
Lower
Figure 7: Adjusting appliance height
4. Slide range into cut-out opening and double check
for levelness. If the range is not level, pull unit out
and readjust leveling legs, or make sure floor is level.
8

Publicité

Table des Matières
loading

Table des Matières