Controlling cooking temperature:
Strong (100°C): Press "heat" button once and
-
select the function for high temperature 100°C;
button flashes, then press go / stop button to
start program. Selected water temperature is
maintained at 100°C (+/- 2°C), and the program
adapts to increasing temperature as heating
proceeds. Pre-set cooking time: 30 minutes.
End of cooking: corresponding light flashes and
machine beeps 4 times before returning to
function selection. Mix as desired according to
dial.
-Medium (80°C): Press "heat" button twice and
select medium temperature function 80°C;
button flashes, then press go / stop button to
start program. Selected water temperature is
maintained at 80°C (+/- 2°C), and the program
adapts to increasing temperature as heating
proceeds. Pre-set cooking time: 30 minutes.
End of cooking: corresponding light flashes and
machine beeps 4 times before returning to
function selection. Mix as desired according to
dial.
Weak (60°C) : Press "heat" button three times
-
and select medium temperature function 60°C;
the button flashes, then press go / stop button
to start program. Selected water temperature
is maintained at 60°C (+/- 2°C), and the
program adapts to increasing temperature as
heating proceeds. Pre-set cooking time: 30
minutes. End of cooking: corresponding light
flashes and machine beeps 4 times before
returning to function selection. Mix as desired
according to dial.
4. 4. 4. 4. PRE
PRE
PRE- - - - PROGRAMMED RECIPES
PRE
PROGRAMMED RECIPES
PROGRAMMED RECIPES
PROGRAMMED RECIPES
To prevent soup overflowing, ensure food and
liquids do not exceed the 1400ml mark for
heating.
Heating works via thermostat.
Your heating blender is equipped with a
memory function enabling it to memorise
settings for 2 minutes in case of breakdown.
During cooking and mixing of a hot liquid it is
essential to leave lid and bowl on the machine
to prevent injury.
Carefully wash soup machine after use, but
never use a dishwasher.
Smooth soup: Press "smooth" button once
-
until it flashes, then press go / stop button to
start program.
Selected water temperature is maintained at
80°C (+/- 2°C) (program adapts to increasing
temperature as heating proceeds).
Pre-set cooking time: 25 minutes. Mixing takes
place during cooking.
Indicator for end of cooking: corresponding
light flashes and machine beeps 4 times.
Heating temperature is maintained between
75 and 85 degrees.
The soup keeps hot for 40 minutes, and at the
end of this time machine beeps 4 times.
-Soup with pieces: Press "thick" button once
until it flashes, then press go / stop button to
start program.
Selected water temperature is maintained at
80°C (+/- 2°C) (program adapts to increasing
temperature as heating proceeds).
Pre-set cooking time: 28 minutes.
Indicator for end of cooking: corresponding
light flashes and machine beeps 4 times.
Heating temperature is maintained between
75 and 85 degrees.
The soup keeps hot for 40 minutes, and at the
end of this time machine beeps 4 times.
5. 5. 5. 5. CLEANING
-Always unplug machine before cleaning.
- Clean each piece thoroughly before and after
each use.
-Regularly check all pieces before re-assembly.
If any piece is damaged, STOP USING THE SOUP
MACHINE.
WARNING: The blade is very sharp. Handle with
care.
CLEANING
CLEANING
CLEANING
16