When laying the cables, make sure that they are not squeezed or scoured on sharp edges. Use rubber
grommets for the feed-though points.
Any changes in the vehicle that become necessary for the installation of the CD tuner or other compo-
nents must be carried out in such a way that neither traffic security nor the stability of the car are affect-
ed.
If there are any doubts regarding selection of the installation site, inquire for information from your car
vendor.
Before drilling the attachment holes, make sure that no electric cables, brake lines, the fuel tank or simi-
lar are damaged.
When using tools to install your parking aid, observe the tool manufacturer's safety information.
When installing the components, take into consideration the risk of accident which can arise from
devices being torn away in case of an accident. Therefore, you should secure every component in a
place where it cannot be dangerous to passengers.
If proper operation of the device is no longer possible, power it down at once and secure it against reac-
tivation.
Avoid strong mechanical strain on the device.
Do not leave packaging material lying around carelessly. It may become a dangerous toy for children.
Keep the device out of reach of children. It is not a toy.
If you are not sure about the correct connection or if there are any questions that are not covered by the
operating instructions, do not hesitate to contact our technical support or another specialist.
If you have reason to believe that the device can no longer be operated safely, disconnect it immediate-
ly and make sure it is not unintentionally operated. It can be assumed that safe operation is no longer
possible if:
- the device shows any visible damage,
- the device no longer works and
- the device was stored under unfavourable conditions for an extended period of time or
- after it was exposed to extraordinary stress caused by transport.
21