Care & Maintenance - Ninja BL610CR Guide De L'utilisateur

ASSEMBLY & USE OF THE PITCHER – CONT.
9 Holding the lid by the handle in the
upright position, place it on top of the
pitcher, aligning the arrow ( ) located
on the lid with the arrow ( ) located on
the pitcher's handle. Press the handle
down until you hear a click.
10 Select the speed according to your
blending requirements*:
• Use the LOW setting for processing
and mixing.
• Use the MEDIUM setting for blending
and ice crushing.
• Use the HIGH setting for pureeing
and liquefying.
• Use the PULSE button for controlled
chopping and processing.
*See Blending Chart.
NOTE: Pulse ingredients for even
chopping by pressing down in
short intervals.
8
ninjakitchen.com
11 When ingredients have reached your
desired consistency, stop the appliance
by pressing the power button ( ) and
wait for the Stacked Blade Assembly
to stop turning.
12 To remove the lid, press the release
button on the lid, pull the lid handle up
to a 90° angle, and lift the lid off. Turn
the pitcher counterclockwise and then
lift off the base.
13 Open the pour spout cap and use the
spout to empty liquid contents.
For thicker consistencies, first remove
the lid by pressing the release button
and pulling the lid handle up to a 90
degree angle to lift lid off the pitcher.
Then, carefully remove the Stacked
Blade Assembly by the top of the shaft.
Place Stacked Blade Assembly away
from the work area to avoid accidental
contact. Finally, empty contents from
the pitcher.
14 Make sure the unit is unplugged when
not in use.
CARE & MAINTENANCE
CLEANING
1 Separate all parts from each other.
2 Hand-Washing: Wash the pitcher,
lid, and Stacked Blade Assembly in
warm, soapy water. When washing
the Stacked Blade Assembly, use a
dishwashing utensil with a handle to
avoid direct hand contact with blades.
Handle blade assembly with care to
avoid contact with sharp edges. Rinse
and air-dry thoroughly.
Dishwasher: The pitcher, lid, and
Stacked Blade Assembly are all
dishwasher safe. The lid and Stacked
Blade Assembly are top-rack
dishwasher safe. Ensure the Stacked
Blade Assembly is removed from the
pitcher before placing in the dishwasher.
3 Wipe the motor base clean with a
damp cloth.
STORING
1 Store the Ninja® Professional 1000
upright with the Stacked Blade
Assembly inside the pitcher with the lid
secured on top. Do not place anything
on top. Loosely wrap the power cord
around the cord storage hook in the back
of the unit.
RESETTING THE MOTOR
THERMOSTAT
The Ninja® Professional 1000 features
a unique safety system that prevents
damage to the unit's motor and drive
system should you inadvertently overload
the unit. If the unit is overloaded, the
motor will stop. To reset the unit, follow
the resetting procedure below:
1 Unplug the unit from the electrical
outlet.
2 Remove and empty the pitcher and
ensure no ingredients are jamming the
Stacked Blade Assembly.
3 Allow the unit to cool for
approximately 15 minutes.
4 Place the pitcher onto the base and
plug the unit into the electrical outlet.
5 Proceed to use the unit as before,
making sure to not exceed the
recommended maximum capacities.
ninjakitchen.com
9