Publicité
Les langues disponibles
Les langues disponibles
rain-proof, the remote sensor must be always placed
upwards so that rain won't get inside the sensor through
the vent holes on the bottom of the senor which functions
EN
to let the remote sensor detect the environmental tem-
perature and humidity more precisely and quickly.
Maximum & Minimum Recorded Temperature
& Humidity
1. Press MAX/MIN/Clear button once to display the hi-
ghest indoor and outdoor temperatures/humidity re-
corded since last reset. MAX is shown on the display.
2. Press MAX/MIN/Clear button again to display the
lowest indoor and outdoor temperatures/humidity re-
corded since last reset. MIN is shown on the display.
3. To clear and reset the max/min records, when either
the MAX or MIN record is shown on the LCD display,
press and hold MAX/MIN/Clear for 3 seconds.
-44-
4. When either the MAX or MIN record is shown on the
LCD display, press ALL-TIME/24 button once to set
the data record time interval between ALL TIME or 24
hours. Note: Both ALL TIME and 24 hours represent
the time since you last time manually cleared the
history data or battery installation.
Purchasing Additional Remote Sensors
The model number of the remote sensor for this unit
is TPR65.
Additional sensors may be ordered directly from Amazon
or ThermoPro by contacting our customer service listed
below.
Specifications
1. 433 Mhz transmission frequency.
2. Transmission range up to 200 ft. (range maybe
-45-
EN
Publicité
