ThermoPro TP-60S Manuel D'utilisation page 19

Buttons
CHANNEL/SYNC: Press once to display the tempera-
ture and humidity readings from up to 3 outdoor remote
EN
sensors; Press and hold this button to enter the
synchronization mode.
MAX/MIN/CLEAR: Press once to display the maximum
or minimum temperature and humidity; Press and hold
to clear the history data.
° F/°C/ALL-TIME/24: Press to select the temperature
display in ºC or ºF; When the display shows the maxi-
mum or minimum temperature and humidity , press this
button once to set the maximum and minimum data
record time interval between ALL TIME or 24 hours.
Note: Both ALL TIME and 24 hours represent the time
since you last time manually cleared the history data
or installed a new battery.
-36-
Temperature & Humidity Trend
1. indicates the temperature & humidity is in an
increasing trend.
2. indicates the temperature & humidity is in an no
change trend.
3. indicates the temperature & humidity is in a
decreasing trend.
Outdoor Remote Sensor (Transmitter) Features
1
7
2 5
3
4
6
-37-
EN