Meec tools 012588 Mode D'emploi page 24

EN
MAINTENANCE
GENERAL
• The power tool is built for a long service
life and minimum maintenance.
• Regular care and cleaning is, however,
required for long-lasting functionality.
Wipe the tool with a damp cloth and
brush it with a soft brush or dry cloth.
• Keep the ventilation openings clean and
free from dust. Check at regular intervals
that the ventilation openings are clean
and not blocked by dirt or foreign objects.
Blow clean when necessary rent with
compressed air (max 3 bar).
WARNING!
• Always wear safety glasses that seal to
your face and also protect from the side
when using compressed air to blow
clean the tool. Wear a dust filter mask as
well when working in dusty conditions.
IMPORTANT:
• Do not use detergent that contains
solvent or abrasive additives. Only use
clean, mild detergent to remove dust,
dirt and carbon from the carbon brushes
on the motor.
• Keep brake fluid, petrol, mineral oil and
petroleum products away from the
plastic parts on the tool. Such products
can damage or discolour the plastic.
STORAGE
Power tools not in use should be stored in a
dry, frost-free place.
24