SOLAC CP7304 Mode D'emploi page 13

To remove the batteries, once
the life of the applian-ce, pro-
ceed as follows:
- Open the top shell of the appa-
ratus, removing pre-viously
with the help of a screwdriver
fixing screws (Fig 8)
- Identify the battery wires and
cut their (Red and Black). To
avoid risks of a short circuit
with a possible residual battery
load, first cut the Red wire and
protect it by using insulating
tape, then proceed to cut the
Black wire proceeding in the
same way. (Fig 9)
- Safely remove the battery from
its housing