Publicité
LOCATION OF CONTROLS
1) DUST COVER
2) LEFT SPEAKER
3) 3.5MM HEADPHONE JACK
4) POWER LED INDICATOR
5) POWER ON/OFF/ VOLUME KNOBS
6) RIGHT SPEAKER
7) SPINDLE ADAPTOR
8) 33/45 RPM SPEED SELECTOR
9) PICK-UP HOLDER
10) LINE OUT SOCKET
11) AUTO STOP SWITCH
12) AC CORD
CAUTION:
USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULTE IN HAZARDOUS RADIATION EXPOSURE.
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE
PERSONNEL.
PRECAUTIONS FOR USE
INSTALLATION
•
UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
•
DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND BEFORE
ALL OTHER CONNECTIONS HAVE BEEN MADE.
•
DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS
AROUND THE UNIT FOR VENTILATION.
CONNECTION
1.
CONNECT THE POWER CORD TO AC OUTLET
2.
SWITCH ON THE SYSTME TO AND IF THE POWER LED INDICATOR IS ON WITH RED LIGHT, IT'S MEAN
THE POWER SUPPLY IS NORMAL. NOW YOUR SYSTEM IS READY TO PLAY THE MUSIC.
TOP COVER ASSEMBLY
1.
PUSH THE METAL BRACKET TO REAR SIDE.
2.
CONNECT THE METAL BRACKET TO THE TOP COVER
3.
CONNECT THE HINGE OF THE TOP COVER TO THE MAIN UNIT
GB-1
Publicité
