Peaq PPA44BT-W Mode D'emploi page 29

microSD card
1. Insert a micro SD card into the
micro SD card slot. The speaker
will read the card immediately and
starts the music playback.
Note: Support micro SD cards up
to 32 GB.
2. Press the button
to skip title forward or back.
3. Use the
pause the playback.
Note: Press the MODE button
shortly to switch manually be-
tween BT, AUX IN or microSD
card mode.
_PPA44BT_W_160322_V05_HR.indb 29
or
button to start or
Audio input (AUX IN)
Attention:
Before you connect your external
player (for example an MP3 player),
refer to its user guide regarding safety
instructions and use with other de-
vices.
1. Connect the stereo cable to the
AUX jack.
2. Insert the other end of the cable
into the headphone or LINEOUT
jack of the external device.
Note:
• Disconnect the Bluetooth
nection with audio sources before
connecting an external device via
AUX IN.
• Switch the external player on and
turn its volume to zero.
• Turn the speaker system on and
regulate the volumes of both de-
vices.
ENGLISH
con-
®
29
22/3/16 4:51 PM