Holler Tore BALU Mode D'installation Et D'emploi page 61

7.4.4. Display
Press P3 four times – open the menu for configuring "Display"
Press P2 once – choose the menu for configuring "Display"
Sub-menu options - change the settings with "PROG/OK"
- move with P1 or P3 up and down in the menu
CONTRAST Setting the display contrast
The brightness of the display can be adjusted from 0 –
OK
63 in the "Contrast settings" menu
0...27...63
BACKGROUND Background illumination of the display
The period for which the display is lit up can also be set
LIT UP CONTINUOUSLY
as 30 or 60 seconds.
60 SEC. / 30 SEC.
OUTPUT Exit the "Display" menu
By pressing the P2 "PROG/OK" button, you return to
OK
the main menu of the "Display" menu item
7.4.5. Test
Press P3 five times – open the menu for configuring "Remote"
Press P2 once – choose the menu for configuring " Remote "
Flashing indicates that a safety device has got triggered:
TB = Safety device connected to terminal 23 has got triggered
FI = Safety device connected to terminal 26 has got triggered
FS = Safety device connected to terminal 25 has got triggered
CP = Safety device connected to terminal 24 has got triggered
7.4.6. Wireless (Remote)
Press P3 six times – open the menu for configuring "Test"
Press P2 once – choose the menu for configuring "Test"
ENGLISH
20