Temperature Safety; Battery Power Saving; Intelligent Automated Functions: Program Modes - Precision Lumina Max LED Manuel Utilisateur

3.2 Temperature safety

The Lumina Max light has a safety cut off to preserve the lifetime of the diode should overheating occur.
When the light gets close to the cut off temperature, you will be warned by intermittent beeping. User
time before the warning varies between 45 and 80s. The light can be used for approximately another 15s
before it cuts off. Overheating is indicated by 3 short beeps followed by fast red flashing

3.3 Battery power saving

Sleep
If the light has not been activated for 5 minutes, or placed in the dock, it will go into sleep mode to
conserve energy. Press any button to reactivate it.
Deep Sleep
If not used or placed in the docking station for 6 hours the light will go into deep sleep mode. It must be
placed in the dock for one second to be reactivated.

3.4 Intelligent Automated Functions: Program modes

Indicator diode
Button B1 (large circle)
Button B2 (small circle)
Program change:
--> -->
Press A1+A2 at same time 3s --> scroll --> wait 3s for beep
A1/B1
3s
A1/B1
3s 3s
A1/B1
3s 3s 3s
Button function: A1 = B1
etc to stop A1/B1
3s
Indicator diode
Button A1 (large circle)
Button A2 (small circle)
Button function: A2 = B2
A2/B2
1s
A2/B2
1s 1s
A2/B2
1s 1s
etc to stop A2/B2
1s 1s
15