Transporting And Handling; With One Person - Kunzle & Tasin Bona Belt UX Manuel D'utilisation Et De Maintenance

Transporting and Handling

With one person

The machine is heavy therefore remove the motor and handle unit before it is transported.
Ask for assistance to transport the three parts.
The machine can be dismantled into three parts to facilitate transportation:
Motor Suction tube/handle unit
Transporting the machine by yourself? Proceed as follows:
1.
Ensure the power supply cable is disconnected from the mains
and the machine.
8
Bona Belt UX Manual
Base frame with drum
2.
Open the belt guard after turning the screw counter-clockwise.
Transporting and Handling (Cont.)
With one person (cont.)
3. A.
Loosen the belt tightener using the lever (A) and remove the belts.
4.
5.
Remove the motor and take it
Loosen the knob (A) until the hollow
washers positioned on the motor to the work area.
support shaft slip out of their support
housing.
6.
After lowering the lever (A), lift the casing (B) and release the bar (C) from the cylinder (D).
EN
Bona Belt UX Manual
9