Using The Remote Control; Starting The Stb; First Time Installation - Engel RT5130U Manuel D'utilisation

4. INSTALLATION

4.3. Using the Remote Control

Step 1: Open the battery box cover of the controller, insert 2 x AAA batteries according to
the "+" and "–" marks in the battery box, and close the cover.
1. Open the cover. 2. Install batteries 3. Close the cover
Step 2: To use the Remote Control, point it towards the front of the Digital Set Top Box.
The Remote Control has a range of up to 7 meters from the Set Top Box at an angle of up
to 60 degrees.
Note: Sunlight or very bright light will decrease the sensitivity of the Remote Control.

4.4. Starting the STB

Step 1: Verify that all cables are correctly connected.
Step 2: Verify that power supply of all devices is normal.
Step 3: Turn on the TV.
Step 4: Turn on the STB.

4.5. First Time Installation

If you are using the unit for the first time or have restored the unit to factory default, the
installation guide menu will appear on your TV screen.
1. OSD Language:
press RIGHT/LEFT key to select a language.
2. Region:
press RIGHT/LEFT key to select country.
3. Channel Search: press OK key to auto scan.
63