Bosch ALS 30 Notice Originale page 12

Masquer les pouces Voir aussi pour ALS 30:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
OBJ_BUCH-2280-002.book Page 12 Monday, July 6, 2015 5:18 PM
12 | English
Never operate the leaf blower/garden
vacuum with defective guards or
shields, or without safety devices, for
example collection bag in place.
Always ensure all handles and guards
supplied are fitted when using the
leaf blower/garden vacuum. Never at-
tempt to use an incomplete leaf blow-
er/garden vacuum or one with an un-
authorised modification.
While operating the leaf blower/gar-
den vacuum always be sure of a safe
and secure operating position at all
times.
Always be aware of your surround-
ings and stay alert for possible haz-
ards that you may not hear whilst op-
erating the leaf blower/garden
vacuum.
Do not over reach and keep your bal-
ance at all times.
Always be sure of your footing on
slopes.
Walk, never run.
Keep all cooling air inlets clear of de-
bris.
Never blow debris in the direction of
bystanders.
Do not carry the machine by the cable.
The wearing of a face mask is recom-
mended.
Wear safety goggles.
Do not modify this product. Unau-
thorized modifications may impair the
safety of your product and may result
in increased noise and vibration.
F 016 L81 152 | (6.7.15)
Do not vacuum solid objects such as
big branches, broken glass, pieces of
metal and stones.
A worn fan or blower housing (chips,
cracks, nicks) may cause an in-
creased risk of injury from thrown for-
eign objects. If the blower housing is
damaged, consult the Bosch hotline.
Remove the plug from the socket:
– Whenever you leave the machine.
– Before checking, clearing a blockage
or working on the leaf blower/garden
vacuum.
– After striking a foreign object, inspect
the leaf blower/garden vacuum for
damage and make repairs as neces-
sary.
– If the leaf blower/garden vacuum
starts to vibrate abnormally check im-
mediately.
Connecting to the mains
The voltage indicated on the rating
plate must correspond to the voltage
of the power source.
We recommend that this equipment
is only connected into a socket which
is protected by a circuit-breaker that
would be actuated by a 30 mA residu-
al current.
Only use or replace power supply ca-
bles for this unit which correspond to
the types indicated by the manufac-
turer. See the operating instructions
for the order no. and types.
Never touch the mains plug with wet
hands.
Bosch Power Tools

Publicité

Table des Matières
loading

Table des Matières