System Settings; Displaying The "System" Setting Screen; Activating The Bluetooth Audio Source; Setting The Ever Scroll - Pioneer AVH-X5700BHS Mode D'emploi

System settings

Displaying the "System" setting
screen
1 Press .
2 Touch , and then .
The "System" setting screen appears.
Activating the Bluetooth audio
source
X4700BS X3700BHS
X5700BHS
1 Display the "System" setting screen.
 Displaying the "System" setting screen on page 37
2 Touch [AV Source Settings].
3 Touch [Bluetooth Audio] to switch "On"
(default) or "Off".

Setting the ever scroll

When "Ever Scroll" is set to "On", the recorded text information
scrolls continuously in the display.
1 Display the "System" setting screen.
 Displaying the "System" setting screen on page 37
2 Touch [Ever Scroll] to switch "On" or "Off"
(default).

Setting the rear view camera

A separately sold rear view camera (e.g. ND-BC6) is required
for utilizing the rear view camera function. (For details, consult
your dealer.)
Rear view camera
This product features a function that automatically switches to
the full-screen image of the rear view camera installed on your
vehicle, when the shift lever is in the REVERSE (R) position.
p When the shift lever is aligned to the REVERSE (R) position
immediately after the system of this product is started up,
only the camera image will be displayed and the parking
assist guidelines and the message, "The video may appear
reversed" will not be displayed.
Camera for Camera View mode
Camera View can be displayed at all times. Please note that
with this setting, the camera image is not resized to fit, and that
a portion of what is seen by the camera is not viewable.
CAUTION
Pioneer recommends the use of a camera which outputs
mirror reversed images, otherwise the screen image may
appear reversed.
p Immediately verify whether the display changes to a
rear view camera image when the shift lever is moved to
REVERSE (R) from another position.
p When the screen changes to full-screen rear view camera
image during normal driving, switch to the opposite setting
in "Camera Polarity".
X2700BS
Setting rear view camera activation
1 Display the "System" setting screen.
 Displaying the "System" setting screen on page 37
2 Touch [Camera Settings].
3 Touch [Back Camera Input] to switch "On" or
"Off" (default).
Setting the polarity of the rear view
camera
p This function is available when "Back Camera Input" is
"On".
 Setting rear view camera activation on page 37
1 Display the "System" setting screen.
 Displaying the "System" setting screen on page 37
2 Touch [Camera Settings].
3 Touch [Camera Polarity].
●
Battery (default):
The polarity of the connected lead is positive.
●
Ground:
The polarity of the connected lead is negative.
Setting the camera for Camera
View mode
To display "Camera View" at all times, "Camera View" needs to
be set to "On".
p To set the rear view camera for Camera View mode, set
"Back Camera Input" to "On".
 Setting rear view camera activation on page 37
p If you use the 2nd camera, set "AV Input" to "Camera".
(AVH-X5700BHS)(AVH-X3700BHS)
 Starting procedure (for camera) on page 35
1 Display the "System" setting screen.
 Displaying the "System" setting screen on page 37
2 Touch [Camera Settings].
3 Touch [Camera View] to switch "On" or "Off"
(default).
If no operations are performed for seven seconds on the AV
operation screen, the camera view will appear automatically.
 If you touch the screen while the camera view
is displayed, the displayed image will turn off
temporarily.
 When the camera view of both rear view camera
and 2nd camera are available, the key to switch
the display appears.
 Touch this key to switch the display between rear
view image and 2nd camera image.

Turning off the demo screen

1 Display the "System" setting screen.
 Displaying the "System" setting screen on page 37
2 Touch [Demo Mode] to switch "On" (default) or
"Off".

Selecting the system language

●
If the embedded language and the selected language setting
are not the same, text information may not display properly.
●
Some characters may not be displayed properly.
1 Display the "System" setting screen.
 Displaying the "System" setting screen on page 37
2 Touch [System Language].
3 Touch the language that you want to use.
After the language is selected, the previous screen returns.
37